Thông số kỹ thuật Cisco WAP150
Specifications |
Description |
|
Standards |
IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460) |
|
Ports |
LAN Gigabit Ethernet auto-sensing |
|
Cabling type |
Category 5e or better |
|
Antennas |
Internal antennas optimized for installation on a wall |
|
LED indicators |
1 multifunction LED |
|
Operating system |
Linux |
|
Physical Interfaces |
||
Ports |
10/100/1000 Ethernet, with support for 802.3af /at PoE, power port for AC adapter (included) |
|
Buttons |
Reset button, power on/off push button |
|
Lock slot |
Slot for Kensington lock |
|
LEDs |
1 LED |
|
Physical Specifications |
||
Physical dimensions (W x D x H) |
5.31 x 5.31x 1.5 in. (135 x 135 x 38 mm) |
|
Weight |
0.77lb or 350g |
|
Network Capabilities |
||
VLAN support |
Yes |
|
Number of VLANs |
1 management VLAN plus 8 VLANs for SSIDs |
|
802.1X supplicant |
Yes |
|
SSID-to-VLAN mapping |
Yes |
|
Auto-channel selection |
Yes |
|
Spanning tree |
Yes |
|
Load balancing |
Yes |
|
IPv6 |
Yes ● IPv6 host support
● IPv6 RADIUS, syslog, Network Time Protocol (NTP)
|
|
Layer 2 |
802.1Q-based VLANS, 8 active VLANs plus 1 management VLAN |
|
Security |
||
WPA, WPA2 |
Yes, including Enterprise authentication |
|
Access control |
Yes, management Access Control List (ACL) plus MAC ACL |
|
Secure management |
HTTPS |
|
SSID broadcast |
Yes |
|
Rogue access point detection |
Yes |
|
Mounting and Physical Security |
||
Multiple mounting options |
Desktop or Wall |
|
Physical security lock |
Kensington lock slot |
|
Quality of Service |
||
QoS |
Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), client QoS |
|
Performance |
||
Wireless throughput |
Up to 1.2 Gbps data rate (real-world throughput will vary) |
|
Recommended user support |
Up to 64 connective users, 10 active users per radio |
|
Multiple-Access Point Management |
||
Single Point Setup |
Yes |
|
Number of access points per cluster |
4 |
|
Active clients per cluster |
120 |
|
Configuration |
||
Web user interface |
Built-in web user interface for easy browser-based configuration (HTTP, HTTPS) |
|
Management |
||
Management protocols |
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour |
|
Remote management |
Yes |
|
Event logging |
Local, remote syslog, email alerts |
|
Network diagnostics |
Logging and packet capture |
|
Web firmware upgrade |
Firmware upgradable through web browser, imported or exported configuration file |
|
Dynamic Host Configuration Protocol (DHCP) |
DHCP client |
|
IPv6 host |
Yes |
|
HTTP redirect |
Yes |
|
Wireless |
||
Frequency |
Dual concurrent radios (2.4 and 5 GHz) |
|
Radio and modulation type |
Dual radio, Orthogonal Frequency Division Multiplexing (OFDM) |
|
WLAN |
802.11n/ac 2×2 Multiple-Input Multiple-Output (MIMO) with 2 spatial streams at 5 GHz 2×2 MIMO with 2 spatial streams at 2.4 GHz 20-, 40-, and 80-Mhz channels for 802.11ac 20- and 40-Mhz for 802.11n PHY data rate up to 1.2 Gbps 802.11 Dynamic Frequency Selection (DFS) |
|
Data rates supported |
802.11a/b/g: ● 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
● 802.11n: 6.5 to 300 Mbps
◦ 20-MHz bandwidth: MCS 0-15 for supported data rates
◦ 40-MHz bandwidth: MCS 0-15 for supported data rates
● 802.11ac: 6.5 to 867 Mbps
◦ 20-MHz bandwidth: MCS 0-9 for supported data rates
◦ 40-MHz bandwidth: MCS 0-9 for supported data rates
◦ 80-MHz bandwidth: MCS 0-9 for supported data rates
|
|
Frequency band and operating channels |
A/B Regulatory Domain: ● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.240 GHz; 4 channels
● 5.260 to 5.320 GHz; 4 channels
● 5.500 to 5.700 GHz; 8 channels
● 5.745 to 5.825 GHz; 5 channels
E Regulatory Domain: ● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.240 GHz; 4 channels
● 5.260 to 5.320 GHz; 4 channels
● 5.500 to 5.700 GHz; 8 channels
R Regulatory Domain: ● 2.412 to 2.483.5 GHz; 13 channels
● 5.150 to 5.250 GHz; 4 channels
● 5.250 to 5.350 GHz; 4 channels
|
C Regulatory Domain: ● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.240 GHz; 4 channels
● 5.260 to 5.320 GHz; 4 channels
● 5.745 to 5.825 GHz; 5 channels
K Regulatory Domain: ● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.240 GHz; 4 channels
● 5.260 to 5.320 GHz; 4 channels
● 5.500 to 5.620 GHz; 7 channels
● 5.745 to 5.805 GHz; 4 channels
J Regulatory Domain: ● 2.400 to 2.483.5GHz; 13 channels
● 5.150 to 5.250 GHz; 4 channels
● 5.250 to 5.350 GHz; 4 channels
● 5.470 to 5.725 GHz; 11 channels
|
Non-overlapping channels |
2.4 GHz ● 802.11b/g
◦ 20 MHz: 3
● 802.11n
◦ 20 MHz: 3
5 GHz ● 802.11a
◦ 20 MHz: 21
● 802.11n
◦ 20 MHz: 21
◦ 40 MHz: 9
● 802.11ac
◦ 20 MHz: 21
◦ 40 MHz: 9
◦ 80 MHz: 4
|
|
Wireless isolation |
Wireless isolation between clients |
|
External antennas |
None |
|
Internal antennas |
Internal Fixed Planar Inverted-F Antenna (PIFA) |
|
Antenna gain in dBi |
Maximum antenna gain of 3.61 dBi on 2.4 GHz Maximum antenna gain of 3.85 dBi on 5 GHz |
|
Wireless Distribution System (WDS) |
Yes |
|
Fast roaming |
Yes |
|
Multiple SSIDs |
8 |
|
Wireless VLAN map |
Yes |
|
WLAN security |
Yes |
|
Wi-Fi Multimedia (WMM) |
Yes, with unscheduled automatic power save |
|
Operating Modes |
||
Access point mode, WDS Bridging, Workgroup Bridge mode |
||
Environmental |
||
Power options |
IEEE 802.3af Ethernet switch Cisco Power Injector – SB-PWR-INJ2-xx AC adapter – SB-PWR-12V/1.5A power adapter in a box POE power Peak power: 9.5Watts |
|
Compliance |
Safety: ● UL 60950-1
● CAN/CSA-C22.2 No. 60950-1
● IEC 60950-1
● EN 60950-1
Radio approvals: ● FCC Part 15.247, 15.407
● RSS-210 (Canada)
● EN 300.328, EN 301.893 (Europe)
● AS/NZS 4268.2003 (Australia and New Zealand)
EMI and susceptibility (Class B): ● FCC Part 15.107 and 15.109
● ICES-003 (Canada)
● EN 301.489-1 and -17 (Europe)
|
|
Operating temperature |
0° to 40°C (32° to 104°F) |
|
Storage temperature |
-20° to 70°C (-4° to 158°F) |
|
Operating humidity |
10% to 85% noncondensing |
|
Storage humidity |
5% to 90% noncondensing |
|
System memory |
256 MB RAM 128 MB flash |