Thông số kỹ thuật Switch PLANET IGS-501T
Hardware | |
Hardware Version | 4 |
Copper Ports | 5 x 10/100/1000Base-T RJ45 TP auto-MDI/MDI-X, auto-negotiation |
Connector | Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
Alarm | Provides one relay output for power failure Alarm relay current carry ability: 1A @ DC 24V |
LED | 3 x LED for system and power: Green: DC Power 1 Green: DC Power 2 Green: Power Fault 2 x LED for each copper port Green: 1000Mbps LNK/ACT Orange:10/100Mbps LNK/ACT |
ESD Protection | 6KV |
EFT Protection | 6KV |
Power Requirements | 12~48V DC, Redundant power with polarity reverse protection function, 24V AC power support |
Power Consumption/ Dissipation | 5.28 watts/18BTU |
Installation | DIN rail kit and wall-mount ear |
Enclosure | IP30 metal case |
Dimensions (W x D x H) | 32 x 87 x 135 mm |
Weight | 456g |
Switch | |
Switch Processing Scheme | Store-and-Forward |
Address Table | 2K entries |
Buffer Memory | 1M bits on-chip buffer memory |
Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
Switch Fabric | 10Gbps |
Throughput (packet per second) | 7.4Mpps @64bytes |
Jumbo Frame | 9K |
Network Cables | 10/100/1000Base-T Cat. 3, 4, 5, 5e, 6 UTP cable [100 meters (max.)] EIA/TIA-568 100-ohm STP [100 meters (max.)] |
Standards Conformance | |
Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.1p Class of Service |
Regulation Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
Environment | |
Temperature | Operating: -40~75 degrees C Storage: -40~75 degrees C |
Humidity | Operating: 5~90% Storage: 5~90% (non-condensing) |